Heavy-Duty Galvanized Steel Stock Tank for Outdoor Use
You don’t want to keep replacing tanks every few years just because they can’t survive a little sun, salt, or structural load. That’s where YUTANK’s Heavy-Duty Galvanized Steel Stock Tank comes in.
Built from Q235B structural-grade steel, fully hot-dip galvanized inside and out, this tank is designed to handle extreme RAS aquaculture conditions, high-capacity grow-out operations, and even outdoor rooftop installations in coastal cities. It’s modular, relocatable, and strong enough to support thousands of liters of water without a single weld seam.
Whether you’re looking to expand your recirculating aquaculture setup or need rugged containment that won’t buckle in the heat — this tank is ready.
Share：
Accessories：
View related accessories
The YUTANK Heavy-Duty Galvanized Steel Tank isn’t just any stock tank. It’s engineered specifically for commercial-scale aquaculture operations that demand long service life, structural integrity, and fast on-site deployment—even under tough conditions.
🔩 Construction That Holds Up
Each tank panel is made from Q235B carbon structural steel, laser cut and cold-bent for high load capacity. Then it’s fully hot-dip galvanized (not just electroplated), giving it a zinc layer thickness of 80–120μm that protects against seawater, UV rays, and corrosion in all-weather environments.
The walls are assembled using pre-drilled flanged panels joined with galvanized bolts and waterproof sealing tape. That means:
-
No on-site welding
-
No expensive coating repairs
-
100% modular and relocatable
🛠 Flexible Configurations
Available in round and rectangular formats, these tanks range from 1.5 meters to 6 meters in diameter, with custom heights from 1m to 2.5m. They can also be tailored with inlet/outlet ports, overflow protection, slope-bottom drainage, or even canvas inner liners for enhanced hygiene in fish fry applications.
Whether you’re installing on rooftops, indoor farms, coastal outdoor grow-out sites, or mobile testing stations—this tank adapts to your plan.
🐟 Built for Aquaculture, Not Just Water
This isn’t a general-purpose metal tank. Every design choice—from the smooth interior for easy cleaning to lift lugs for crane hoisting—is made with RAS farms, hatcheries, and grow-out modules in mind.
You’re not just getting a tank. You’re getting a scalable infrastructure component that fits seamlessly into professional fish farming systems.
The YUTANK Heavy-Duty Galvanized Steel Tank isn’t just any stock tank. It’s engineered specifically for commercial-scale aquaculture operations that demand long service life, structural integrity, and fast on-site deployment—even under tough conditions.
🔩 Construction That Holds Up
Each tank panel is made from Q235B carbon structural steel, laser cut and cold-bent for high load capacity. Then it’s fully hot-dip galvanized (not just electroplated), giving it a zinc layer thickness of 80–120μm that protects against seawater, UV rays, and corrosion in all-weather environments.
The walls are assembled using pre-drilled flanged panels joined with galvanized bolts and waterproof sealing tape. That means:
-
No on-site welding
-
No expensive coating repairs
-
100% modular and relocatable
🛠 Flexible Configurations
Available in round and rectangular formats, these tanks range from 1.5 meters to 6 meters in diameter, with custom heights from 1m to 2.5m. They can also be tailored with inlet/outlet ports, overflow protection, slope-bottom drainage, or even canvas inner liners for enhanced hygiene in fish fry applications.
Whether you’re installing on rooftops, indoor farms, coastal outdoor grow-out sites, or mobile testing stations—this tank adapts to your plan.
🐟 Built for Aquaculture, Not Just Water
This isn’t a general-purpose metal tank. Every design choice—from the smooth interior for easy cleaning to lift lugs for crane hoisting—is made with RAS farms, hatcheries, and grow-out modules in mind.
You’re not just getting a tank. You’re getting a scalable infrastructure component that fits seamlessly into professional fish farming systems.
The YUTANK Heavy-Duty Galvanized Steel Tank isn’t just any stock tank. It’s engineered specifically for commercial-scale aquaculture operations that demand long service life, structural integrity, and fast on-site deployment—even under tough conditions.
🔩 Construction That Holds Up
Each tank panel is made from Q235B carbon structural steel, laser cut and cold-bent for high load capacity. Then it’s fully hot-dip galvanized (not just electroplated), giving it a zinc layer thickness of 80–120μm that protects against seawater, UV rays, and corrosion in all-weather environments.
The walls are assembled using pre-drilled flanged panels joined with galvanized bolts and waterproof sealing tape. That means:
-
No on-site welding
-
No expensive coating repairs
-
100% modular and relocatable
🛠 Flexible Configurations
Available in round and rectangular formats, these tanks range from 1.5 meters to 6 meters in diameter, with custom heights from 1m to 2.5m. They can also be tailored with inlet/outlet ports, overflow protection, slope-bottom drainage, or even canvas inner liners for enhanced hygiene in fish fry applications.
Whether you’re installing on rooftops, indoor farms, coastal outdoor grow-out sites, or mobile testing stations—this tank adapts to your plan.
🐟 Built for Aquaculture, Not Just Water
This isn’t a general-purpose metal tank. Every design choice—from the smooth interior for easy cleaning to lift lugs for crane hoisting—is made with RAS farms, hatcheries, and grow-out modules in mind.
You’re not just getting a tank. You’re getting a scalable infrastructure component that fits seamlessly into professional fish farming systems.
The YUTANK Heavy-Duty Galvanized Steel Tank isn’t just any stock tank. It’s engineered specifically for commercial-scale aquaculture operations that demand long service life, structural integrity, and fast on-site deployment—even under tough conditions.
🔩 Construction That Holds Up
Each tank panel is made from Q235B carbon structural steel, laser cut and cold-bent for high load capacity. Then it’s fully hot-dip galvanized (not just electroplated), giving it a zinc layer thickness of 80–120μm that protects against seawater, UV rays, and corrosion in all-weather environments.
The walls are assembled using pre-drilled flanged panels joined with galvanized bolts and waterproof sealing tape. That means:
-
No on-site welding
-
No expensive coating repairs
-
100% modular and relocatable
🛠 Flexible Configurations
Available in round and rectangular formats, these tanks range from 1.5 meters to 6 meters in diameter, with custom heights from 1m to 2.5m. They can also be tailored with inlet/outlet ports, overflow protection, slope-bottom drainage, or even canvas inner liners for enhanced hygiene in fish fry applications.
Whether you’re installing on rooftops, indoor farms, coastal outdoor grow-out sites, or mobile testing stations—this tank adapts to your plan.
🐟 Built for Aquaculture, Not Just Water
This isn’t a general-purpose metal tank. Every design choice—from the smooth interior for easy cleaning to lift lugs for crane hoisting—is made with RAS farms, hatcheries, and grow-out modules in mind.
You’re not just getting a tank. You’re getting a scalable infrastructure component that fits seamlessly into professional fish farming systems.
Download the User Manual
Get the complete user operation guide for YUTANK recirculating aquaculture system equipment, understand the product functions, specification parameters, installation steps, usage methods and solutions to common problems of the recirculating aquaculture system equipment, and help you quickly get started and use this product efficiently.
| Brochures and Overviews | Language | File Type | File Size | Download |
|---|---|---|---|---|
| Product Information - R1000 Distance Sensor | en | 1 MB |  |
|
| Product Overview - Photoelectric Sensors | en | 5 MB | |
|
| Product Overview - Industrial Sensors, Systems and Communication | en | 3 MB | |
|
| Product Information - R10x and R20x Series Standard Housings - All Sensing Modes | en | 3 MB | |
|
| Product Information - M18 Series - Cylindrical Photoelectric Sensors | en | 389 KB | |
|
| Product Information - Sensors and Systems with IO-Link | en | 5 MB | |
|
| Product Overview - LiDAR Sensors | en | 2 MB | |
|
| Product Information - Quick Select Product Guide - Industrial Sensors | en | 47 MB | |
